While concrete is an extremely durable and tough material, it still is subject to wear and tear over an extended period. Concrete resurfacing is the process of making old concrete new again.
Over the existing surface, a coating gets applied, which can provide a new pattern, color, or texture. For example, concrete floor resurfacing can get done on patios, pool decks, and indoor floors.
No matter where you are trying to have your concrete floor resurfaced, the process is generally about the same. The process typically includes four steps.
These steps include cleaning the concrete, patching the spalled areas, spreading the resurfacing, and finishing off with a trowel operation. In this article, we will look at these steps in more detail so you can understand what the process of concrete resurfacing looks like.
Concrete Floor Resurfacing: Step-By-Step Process
Step 1: Cleaning The Concrete
The first step in concrete floor resurfacing is cleaning the concrete. Next, the floor or surface area where the work will get performed will need to get cleaned from any dust, residue, or algae that is on the floor’s surface. Usually, the surface of the floor will get cleaned with a pressure washer of 3500 psi or greater, being held about 8 inches above the ground.
Step 2: Patching The Spalled Areas
Before the resurfacer can get applied, you will need to check to see if any damaged patches are present on the surface of the floor. If patches are present, they must get filled up prior to resurfacing. The resurfacing material is mixed in with one part water and seven parts resurfacer, usually in a 5-gallon bucket. The material is then mixed with a paddle mixer and poured over to fill in the patch.
Step 3: Spreading The Resurfacer
Following the successful repair of the patches, the floor will then need to get resurfaced. You will need to ensure that the joints and gaps on the floor are getting filled up correctly with weather stripping, so the resurfacer doesn’t get into the joints and gaps. Then you will spread the resurfacer on the floor and spread it evenly throughout. The resurfacer will dry within ten to fifteen minutes before losing its workability.
Step 4: Trowel Operation
After successfully pouring and spreading the resurfacer, a trowel will get used to ensure the resurfacer comes out even. The weatherstrips will then get removed, and the resurfacer will dry out for the next 6 to 7 hours.
Why Choose Revival Concrete
Revival Concrete Coatings is a local 5-Star coatings company located in Des Moines. Revival Concrete Coatings utilizes state-of-the-art equipment and only uses the best materials produced in the USA.
For many years they have built a reputation of distinction amongst their local community, and they plan to provide that to you with your next concrete floor resurfacing project.
Revival Concrete Coatings offers a broad range of coatings services, including;
In addition, Revival Concrete Coatings is happy to offer its services to the communities of;
See why Revival Concrete Coatings is amongst the best concrete coating companies in Iowa!
Get A Free Quote
Are you looking for the best concrete floor resurfacing services in Iowa? If so, you should contact the concrete coatings and resurfacing experts at Revival Concrete Coatings.
Whether you need concrete coatings or resurfacing for residential or commercial reasons, Revival Concrete Coatings can help you with what you need!
Get a free quote today by going to their home page and filling out the section labeled “get a free quote.”