Best Garage Floor Contractors in Ankeny, IA

Revival Concrete Coatings is one of West Des Moines, IA’s premier commercial flooring companies.

Ankeny, IA, Garage Floor Coating Services

Call our experts at (515) 850-7192 and get a free, no-obligation consultation for your project.

Are years of wear and tear finally taking over your garage? If you’re tired of looking at unsightly cracks, chips, and stains, turn to our experts at Revival Concrete Coatings. We offer garage floor coatings that will beautify your surfaces and maintain them for decades to come.

We at Revival Concrete Coatings offer a comprehensive line of concrete coating systems that suit a variety of purposes, including those below.

Garage Floor Coatings

A garage will never look its best unless the floor is clean and blemish-free, but upkeep can be challenging without giving it the proper protection. A typical epoxy garage floor will only last you a couple of years, so why not invest in something more durable?

Our garage coating solutions won’t crack or stain for decades if properly maintained. They protect your concrete from dirt, moisture, motor oil, heavy traffic, and other damaging elements that can diminish the look of your garage.

Driveway Coatings

Despite being one of the most visible parts of the home, driveways are all too often overlooked. If you’re starting to notice cracks, potholes, and discolorations on your driveway, reach out to our experts for a lasting solution. Our concrete coatings are very durable, so you can rest easy knowing that your driveway is protected 24/7.

Pool Deck Coatings

Enjoy your pool space safely and comfortably with our heat-dissipating pool deck coating. Direct exposure to sun and moisture might weaken lower-quality products, but our premier blends can withstand years of exposure without showing signs of cracking or staining.

Patio Coatings

Stylish and maintenance-friendly floors are a must if you want to make the most out of your patio space. Our team can remove existing damage on your patio floors and apply the proper coating that can withstand sun, wind, rain, and food spills from your weekend barbecues.

Concrete Coatings

Concrete floors can crack and chip easily if impacted hard enough. They also tend to show wear in very high-traffic areas. However, with the right concrete coatings, you can protect any concrete surface in your home or business from normal wear and tear.

Commercial Coatings

We have years of experience treating parking lots, storage areas, showroom floors, and other commercial spaces in Ankeny with cost-effective solutions that stand the test of time. Unlike your average commercial floor coating, our finishes are non-slip, easy to clean, and can stand up to years of abuse from heavy traffic.

Chip Concrete Coatings

Some people believe that concrete coatings are a mundane flooring option only suited for warehouses and other industrial spaces, but this is far from the truth. Our products offer an attractive visual appeal that can match a wide range of styles.

Why Choose Revival Concrete Coatings?

Our skilled professionals at Revival Concrete Coatings have delivered durable flooring solutions for thousands of property owners in Ankeny for many years. Many trust us with their coating projects because we provide:

  • Tailor-fitted solutions: Our coatings are more than just an epoxy garage floor alternative. They can also provide lasting protection and aesthetic appeal for residential spaces and commercial facilities.
  • Reliable technicians: Our experienced technicians have undergone extensive training and constantly hone their skills to provide nothing but the best service.
  • Durable products: Low-quality epoxy flooring can become impacted by heat, cold, moisture, and many other elements. The products we offer are four times stronger than epoxy, so you can rest easy knowing that you’re getting the best protection available.
  • Speedy completion time: Thanks to our fast-curing polyurea and polyaspartic blends, we can finish most flooring projects before the day is done.

Whether you need an basement floor or a garage floor coating, we’re the team for the job. Get in touch with our experts by calling (515) 850-7192 today.

How It Works

Installing a new concrete coating takes a lot of precision and strategy. To ensure the proper bond between every layer, our professionals follow the thoroughly tested process below.

Step 1: Preparing Your Floors

Our team of certified experts will first assess the condition of your concrete and prepare it for coating using diamond grinders and shot blasters.

Step 2: Applying the Base-Coat

With your floors fully prepped, we begin coating them with a polyurea base. This material quickly and strongly bonds to concrete while creating a smooth, impermeable surface that protects your floor from impact, chemicals, heat, and moisture.

Step 3: Hand-Casting the Flakes

Before the base coat fully cures, we hand-cast optional decorative flakes to improve the visual appeal and uniqueness of your concrete floor. We then scrape off and clean up any loose and excess flakes to create a smooth surface for the final coat.

Step 4: Sealing the Clear Coat

The final polyaspartic coat protects your concrete from sunlight, foot traffic, and other harsh elements. We quality check every inch of the surface to guarantee flooring that will last a long time.

If you want beautiful, low-maintenance concrete floors in your home or business, schedule a consultation with our experts today.

Where We Service

We proudly serve property owners in Ankeny, IA, and surrounding areas, including:

  • Altoona, IA
  • Norwalk, IA
  • Des Moines, IA
  • Waukee, IA
  • West Des Moines, IA

If you want to know more about which areas we serve in Iowa, please don’t hesitate to give us a call.

OUR SERVICES

Get Your Free Quote

"*" indicates required fields

Call Us Today for a Free Quote!

At Revival Concrete Coatings, we are a company that knows what it’s doing. We are technically competent, understand your needs, and have a list of satisfied clientele who invest in our solutions again and again.

If you’re interested in an garage floor coatings or any other concrete coating service, reach out to our team at Revival Concrete Coatings. Call us at (515) 850-7192 to book your free consultation in Ankeny today!

OUR FREQUENTLY
ASKED QUESTIONS

Our polyurea floor coatings are a concrete resurfacing option that is installed over existing concrete floors for both interior and exterior concrete. All of our coatings are installed by hand, thus giving our clients a true, one-of-a-kind floor. We install a wide range of flooring systems such as: solid color, flake, and grind and clear floors.

Clients have the ability to customize any coating with our various color options and design techniques. Concrete coatings are used not only in residential, but industrial and recreational settings as well. Revival Concrete Coatings uses only the highest quality, industrial products on the market to ensure every customer is getting the best value.

Each project is customized to your particular concrete flooring needs. Every job we do is different, because we offer different types of coatings and finishes.  We will work with you to develop a free estimate keeping your budget in mind. 

If using 100% solid polyurea, your floor will be cured and walkable in 12 hours. You can return to full heavy traffic after 24-36 hours depending on the temperature the floor was installed in.

We start every project by first preparing the concrete for our products. It is imperative that we have a fresh concrete surface before installing our concrete coatings on your project – this will allow our products to have only the BEST mechanical bond.

We spend approximately 33% of the project prepping your floor by diamond grinding with our 800 lb Lavina Grinder! Most contractors will come in and just acid wash or not even prep your floor – we get calls all the time about botched installs with customers asking if we can save their project; we must start fresh every time.

If you follow our maintenance and cleaning guidelines, you should not have to worry about resealing the concrete floor coating. 

No worries, we are experts in repairing existing problem areas of concrete. In some cases we have been found to be a cheaper alternative over tearing out and replacing existing slabs of concrete. Once we have saved your concrete we then install our decorative designs to hide the flaws and repairs.

Sweeping takes care of most messes. If there is mud or chemicals you can mop them with any household soap and warm water. Dawn or SimpleGreen work great! If chemicals are spilled on the floor, wipe them up as soon as you notice them.

Floor coatings are extremely resistant to most hazards, including cleaners, gas, oil, transmission fluid, and even most industrial chemicals. Although our coatings are chemical resistant, you will still need to wipe up any chemical spills as soon as you notice them.

Polyurea is useful for concrete floors, as it quickly and strongly bonds to concrete while providing a smooth, virtually impermeable surface that protects the floor from impact, water damage, chemicals, heat, and sunlight.

Residential floors come with a 15 year warranty and commercial floors have a 5 year warranty.

Each project is customized to your particular concrete flooring needs. Every job we do is different, because we offer different types of coatings and finishes. We will work with you to develop a free estimate keeping your budget in mind.
We use the highest quality materials in our polyaspartic floor coatings and we’ve perfected our application process to make the concrete coating permanent. Once completely cured and adhered, the concrete coating is meant to last as long as the substrate it’s adhered to.
Polyaspartic Floor Coatings dry more quickly than Epoxy Floor Coatings, and the finish is also more durable. Our floor concrete coating finishes are also more slip-resistant and will not discolor like some Epoxy Floor Coatings.
Our flooring cures within a few hours, however our team of professionals recommends waiting at least 4-6 hours before walking on your brand new concrete coated flooring. After 12 hours, you can begin moving lightweight objects onto the flooring, like light patio furniture. We recommend waiting a full 24 hours before moving anything heavy back into the area where we’ve applied the coating (your car, heavy equipment or furniture etc.).
It sure won’t! Our concrete floor coverings will not yellow or discolor, because they are UV stable. This one of the many benefits of using Polyurea or Polyaspartic floor coatings.
If you follow our maintenance and cleaning guidelines, you should not have to worry about resealing the concrete floor coating. We offer a professional grade cleaner that will easily remove stains or tire marks, but will also preserve the life of your concrete coating topcoat.
We’ve perfected our 6-step application process, so most typical projects take between 5-10 hours depending on the square footage. We pride ourselves in a one-day application, and will do everything possible to stay within that time frame. Rainy weather can delay the project, but it is rare.
You can clean our concrete coatings with typical sweeping, mopping or steaming, and hoses. We offer maintenance services should your concrete flooring ever need cleaning, however you can also use non-abrasive cleaners, like CLR, to remove grease or other stains.
TAGG’s concrete coatings are oil resistant as well as moisture resistant.
Bayer Material Science first developed Polyaspartic coatings in the 1990’s to protect steel bridges and infrastructure from rusting and corrosion. It has since been modified for different applications, once being durable concrete flooring coatings.
Polyaspartic Concrete coating is another name for Aliphatic Polyurea, which is a hybrid material consisting of ester and other materials. It was originally developed to coat metal bridges. It was later used to coat concrete flooring due to its durability and moisture resistance. Polyurea is also used to coat truck bed liners.
They sure can! We offer wonderful solutions for driveways, patios, and even the area around the pool. Our coatings are all UV stable, which will help prevent discoloration or flaking.
Polyaspartic flooring coatings can be used in a variety of environments. The durability, slip resistant finish is fantastic for any industrial setting, storefronts, patios, or even driveways or garages.
We have perfected a six step process for applying Polyaspartic Floor Coatings that involves prepping the floor, basecoating, applying chips, scraping the chips, and applying the clear UV protective clear coat.
You can! Polyaspartic floor coatings are safe to apply in temperatures as cold as -40 degrees.
Our Polyaspartic Floor Coatings are engineered to rapidly cure, and can be dry in a matter of a few hours! However, we recommend waiting at least 5-6 hours before walking on newly applied coating and 24 hours before moving heavy objects back onto the flooring.
Installing Polyaspartic Floor Coating correctly is critical to the appearance and durability of your flooring. Hiring a professional is the best way to ensure that your flooring will look amazing and last a lifetime! Our team at TAGG Concrete Coatings is certified in Polyaspartic Floor Coating installation and have many years of experience.
It is! Polyaspartic floor coatings are specially formulated for their incredible adhesion properties. If you have existing patches of epoxy coating, our team can sand it down, vacuum, and wipe down the area with a solvent. Once prepped, we will apply your new, superior, Polyaspartic Floor Coating

Our clients are our most important asset.

This is what they say about us.

Where We serve
We service the Greater Des Moines And the Omaha Metropolitan area including:

Revival Concrete Coatings

EVERY job is done right and our customers are 100% Satisfied.

6950 NE 14th Street, Suite 31 Ankeny IA 5002