Best Commercial Coatings in West Des Moines, IA

Revival Concrete Coatings is one of West Des Moines, IA’s premier commercial flooring companies.

We specialize in stylish, durable commercial epoxy flooring that keeps your floors looking their best. Our commercial concrete coatings make scratches, dents, cracks, and stains a thing of the past, keeping your floor in prime condition for years to come.

They say first impressions are the most important. If you own a business, one of the first things your customers notice is your floor. A shabby, unkempt floor often turns off customers, driving them away from your business while painting your establishment in a negative light.

Upgrading your business’s flooring with commercial coatings from Revival Concrete Coatings is a surefire way to make a fantastic first impression while protecting your floors from everyday wear and tear, sun damage, and more.

If you want to protect your business’s floors from physical and environmental damages without sacrificing style, a commercial epoxy floor coating from Revival Concrete Coatings is your solution.

Better Than Epoxy Floor Coatings in West Des Moines, IA

Although epoxy protects your floors from all sorts of damage, it isn’t the best floor coating available. Our polyurea and polyaspartic floor coatings provide even more protection than epoxy while maintaining an elegant style. They are 98% more flexible and four times more durable than epoxy flooring, allowing them to absorb more damage while keeping your floors blemish-free.

We use a polyurea base and a polyaspartic top to give your floor maximum protection. Unlike epoxy floor coatings, these coatings are fully slip-resistant, protecting your guests and employees from potentially dangerous slips and falls. Even when wet, our commercial flooring maintains traction and diminishes the chance of work-related injuries.

Polyurea and polyaspartic floors are chemical-resistant as well, allowing you to say goodbye to unsightly chemical stains for good. They come equipped with an antimicrobial layer that eliminates microorganisms and stops the spread of hazardous germs. They are easy to maintain and don’t require expensive cleaning products like other commercial concrete coatings. Store-bought soap and water are all you need to wipe away troublesome spills and stains.

Polyurea and polyaspartic flooring work great for high traffic facilities and busy commercial business, including:

Fantastic for Indoor and Outdoor Areas

Our polyurea and polyaspartic floorings aren’t limited to indoor spaces. They also work great for outdoor sitting areas and parking lots. Our better-than-epoxy floors are completely UV-resistant and won’t fade or yellow from sun exposure. They also won’t peel over time, allowing them to keep their sleek look that will drive more customers through your doors while boosting your business’s curbside appeal. Our concrete coatings can withstand nearly any environmental hazard mother nature throws their way, keeping your parking lots, sidewalks, and patios protected for years to come.

Fast Installation With Minimal Intrusion

One of the best aspects of polyurea and polyaspartic commercial flooring is how quick and easy it is to install. Our team can install your new commercial concrete coating in less than 24 hours. You’ll be able to continue business as usual in just a few short hours. We work effectively and swiftly to install your floor without interfering with your daily activities.
Our team consists of some of the best concrete coating specialists West Des Moines, IA, has to offer. They know all the best techniques and procedures to give you a first-class commercial floor coating you can depend on for years to come. They have extensive experience with multiple floors and business types, giving them the knowledge they need to tackle even the most demanding commercial floor coating projects.
To ensure we install your new floor coating as efficiently as possible, we use industry-leading tools and materials during the installation process. Our team never cuts corners with cheap supplies, ensuring you receive a high-quality floor 100% of the time. We’ll guide you through our process while answering any questions you have. We always remain transparent and keep you up to date with everything until we complete the job.

 

Stylish Presentation That Doesn’t Tarnish Over Time

As stated before, our commercial coatings are as gorgeous as they are durable. Their beautiful sheen doesn’t diminish over time if you maintain them correctly. They can boost even the shabbiest business’s visual appeal, attracting more customers while keeping regulars feeling welcomed.
If you want even more style, Revival Concrete Coatings offers chic decorative flakes that can take your commercial floors to incredible new heights. We have multiple designs and color schemes to choose from, allowing your floor to match your unique style.

Where We Service

We proudly service all of West Des Moines, IA and other surrounding areas, including:
  • Ankeny, IA
  • Des Moines, IA
  • Norwalk, IA
  • West Des Moines, IA
 
If you don’t see your city on our list but live in Iowa, give us a call anyway. We might be able to assist you with your next flooring project!

High-Quality Commercial Coatings With Unmatched Customer Service

At Revival Concrete Coatings, we believe providing excellent customer service is just as important as installing your new commercial floor. We always treat your business as if it was our own while keeping you informed every step of the way.

Our team strives to exceed your expectations, not just with fantastic concrete floor coatings but with exceptional customer care. We make sure to meet all your needs before completing a project, ensuring you get exactly what you want as expeditiously as possible. You are always our number one priority, and we will do everything we can to satisfy you.

OUR SERVICES

Get Your Free Quote

"*" indicates required fields

Superior Commercial Concrete Coatings in West Des Moines, IA

Revival Concrete Coatings is your source for commercial concrete coatings in West Des Moines, IA. Our commercial coatings give your floors unmatched protection while increasing their overall style. It’s a great way to boost your business’s curbside appeal while keeping your floor blemish-free inside and out. If you want a beautiful commercial floor coating that protects your floors while allowing your business to reach its full potential, Revival Concrete Coatings is for you.
Give your commercial floor the protection it deserves.

Call us at (515) 850-7192 and schedule your appointment with Revival Concrete Coatings to see what our team of floor coating experts can do for you.

OUR FREQUENTLY
ASKED QUESTIONS

Our polyurea floor coatings are a concrete resurfacing option that is installed over existing concrete floors for both interior and exterior concrete. All of our coatings are installed by hand, thus giving our clients a true, one-of-a-kind floor. We install a wide range of flooring systems such as: solid color, flake, and grind and clear floors.

Clients have the ability to customize any coating with our various color options and design techniques. Concrete coatings are used not only in residential, but industrial and recreational settings as well. Revival Concrete Coatings uses only the highest quality, industrial products on the market to ensure every customer is getting the best value.

Each project is customized to your particular concrete flooring needs. Every job we do is different, because we offer different types of coatings and finishes.  We will work with you to develop a free estimate keeping your budget in mind. 

If using 100% solid polyurea, your floor will be cured and walkable in 12 hours. You can return to full heavy traffic after 24-36 hours depending on the temperature the floor was installed in.

We start every project by first preparing the concrete for our products. It is imperative that we have a fresh concrete surface before installing our concrete coatings on your project – this will allow our products to have only the BEST mechanical bond.

We spend approximately 33% of the project prepping your floor by diamond grinding with our 800 lb Lavina Grinder! Most contractors will come in and just acid wash or not even prep your floor – we get calls all the time about botched installs with customers asking if we can save their project; we must start fresh every time.

If you follow our maintenance and cleaning guidelines, you should not have to worry about resealing the concrete floor coating. 

No worries, we are experts in repairing existing problem areas of concrete. In some cases we have been found to be a cheaper alternative over tearing out and replacing existing slabs of concrete. Once we have saved your concrete we then install our decorative designs to hide the flaws and repairs.

Sweeping takes care of most messes. If there is mud or chemicals you can mop them with any household soap and warm water. Dawn or SimpleGreen work great! If chemicals are spilled on the floor, wipe them up as soon as you notice them.

Floor coatings are extremely resistant to most hazards, including cleaners, gas, oil, transmission fluid, and even most industrial chemicals. Although our coatings are chemical resistant, you will still need to wipe up any chemical spills as soon as you notice them.

Polyurea is useful for concrete floors, as it quickly and strongly bonds to concrete while providing a smooth, virtually impermeable surface that protects the floor from impact, water damage, chemicals, heat, and sunlight.

Residential floors come with a 15 year warranty and commercial floors have a 5 year warranty.

Each project is customized to your particular concrete flooring needs. Every job we do is different, because we offer different types of coatings and finishes. We will work with you to develop a free estimate keeping your budget in mind.
We use the highest quality materials in our polyaspartic floor coatings and we’ve perfected our application process to make the concrete coating permanent. Once completely cured and adhered, the concrete coating is meant to last as long as the substrate it’s adhered to.
Polyaspartic Floor Coatings dry more quickly than Epoxy Floor Coatings, and the finish is also more durable. Our floor concrete coating finishes are also more slip-resistant and will not discolor like some Epoxy Floor Coatings.
Our flooring cures within a few hours, however our team of professionals recommends waiting at least 4-6 hours before walking on your brand new concrete coated flooring. After 12 hours, you can begin moving lightweight objects onto the flooring, like light patio furniture. We recommend waiting a full 24 hours before moving anything heavy back into the area where we’ve applied the coating (your car, heavy equipment or furniture etc.).
It sure won’t! Our concrete floor coverings will not yellow or discolor, because they are UV stable. This one of the many benefits of using Polyurea or Polyaspartic floor coatings.
If you follow our maintenance and cleaning guidelines, you should not have to worry about resealing the concrete floor coating. We offer a professional grade cleaner that will easily remove stains or tire marks, but will also preserve the life of your concrete coating topcoat.
We’ve perfected our 6-step application process, so most typical projects take between 5-10 hours depending on the square footage. We pride ourselves in a one-day application, and will do everything possible to stay within that time frame. Rainy weather can delay the project, but it is rare.
You can clean our concrete coatings with typical sweeping, mopping or steaming, and hoses. We offer maintenance services should your concrete flooring ever need cleaning, however you can also use non-abrasive cleaners, like CLR, to remove grease or other stains.
TAGG’s concrete coatings are oil resistant as well as moisture resistant.
Bayer Material Science first developed Polyaspartic coatings in the 1990’s to protect steel bridges and infrastructure from rusting and corrosion. It has since been modified for different applications, once being durable concrete flooring coatings.
Polyaspartic Concrete coating is another name for Aliphatic Polyurea, which is a hybrid material consisting of ester and other materials. It was originally developed to coat metal bridges. It was later used to coat concrete flooring due to its durability and moisture resistance. Polyurea is also used to coat truck bed liners.
They sure can! We offer wonderful solutions for driveways, patios, and even the area around the pool. Our coatings are all UV stable, which will help prevent discoloration or flaking.
Polyaspartic flooring coatings can be used in a variety of environments. The durability, slip resistant finish is fantastic for any industrial setting, storefronts, patios, or even driveways or garages.
We have perfected a six step process for applying Polyaspartic Floor Coatings that involves prepping the floor, basecoating, applying chips, scraping the chips, and applying the clear UV protective clear coat.
You can! Polyaspartic floor coatings are safe to apply in temperatures as cold as -40 degrees.
Our Polyaspartic Floor Coatings are engineered to rapidly cure, and can be dry in a matter of a few hours! However, we recommend waiting at least 5-6 hours before walking on newly applied coating and 24 hours before moving heavy objects back onto the flooring.
Installing Polyaspartic Floor Coating correctly is critical to the appearance and durability of your flooring. Hiring a professional is the best way to ensure that your flooring will look amazing and last a lifetime! Our team at TAGG Concrete Coatings is certified in Polyaspartic Floor Coating installation and have many years of experience.
It is! Polyaspartic floor coatings are specially formulated for their incredible adhesion properties. If you have existing patches of epoxy coating, our team can sand it down, vacuum, and wipe down the area with a solvent. Once prepped, we will apply your new, superior, Polyaspartic Floor Coating

Our clients are our most important asset.

This is what they say about us.

Where We serve
We service the Greater Des Moines And the Omaha Metropolitan area including:

Revival Concrete Coatings

EVERY job is done right and our customers are 100% Satisfied.

6950 NE 14th Street, Suite 31 Ankeny IA 5002